<div dir="ltr">Hello,<br><br>I have an I/O-DATA GV-MVP/RX3 that I recently got second hand here in Japan, and I&#39;m wondering if there&#39;s any way I can get it to work in Ubuntu. It works fine in Windows Vista. I haven&#39;t been able to get it to work out-of-the-box in Ubuntu so far, but I&#39;m completely unskilled at drivers and hardware in linux. I noticed that the GV-MVP/RX2 apparently works in ivtv. When I load tvtime or another tv viewer program in linux, there is no mention of my card at all. My webcam works with some of the software, but trying to change the input source has no effect at all.<br>
<br>Here is my lspci -v:<br>04:02.0 Multimedia video controller: NEC Corporation Dual Tuner/MPEG Encoder (rev 0c)<br>&nbsp;&nbsp;&nbsp; Subsystem: I-O Data Device, Inc. Unknown device d03f<br>&nbsp;&nbsp;&nbsp; Flags: bus master, medium devsel, latency 64, IRQ 3<br>
&nbsp;&nbsp;&nbsp; Memory at dcdfe000 (32-bit, non-prefetchable) [size=8K]<br>&nbsp;&nbsp;&nbsp; Memory at dcdfbff0 (32-bit, non-prefetchable) [size=16]<br>&nbsp;&nbsp;&nbsp; Capabilities: [40] Power Management version 2<br><br>I&#39;m using the Ubuntu Hardy Heron package for ivtv.<br>
<br>These three pages seem to have some clues about getting the RX2 to work, but I have no idea how to follow them:<a href="http://wiki.livedoor.jp/rockie33jp/d/Ubuntu%207.04%20Feisty%A4%C7GV-MVP/RX%A4%F2%C6%B0%A4%AB%A4%B9"><br>
http://wiki.livedoor.jp/rockie33jp/d/Ubuntu%207.04%20Feisty%A4%C7GV-MVP/RX%A4%F2%C6%B0%A4%AB%A4%B9</a><br><a href="http://www.h5.dion.ne.jp/%7Etangos/HomeServer/mbrtv/ivtv.html" target="_blank">http://www.h5.dion.ne.jp/~tangos/Hom...brtv/ivtv.html</a><br>

<a href="http://shino.pos.to/linux/rx2w.html" target="_blank">http://shino.pos.to/linux/rx2w.html</a><br><br>Here is the output of dmesg:<br>[&nbsp;&nbsp;&nbsp; 0.000000] Initializing cgroup subsys cpuset<br>[&nbsp;&nbsp;&nbsp; 0.000000] Initializing cgroup subsys cpu<br>
[&nbsp;&nbsp;&nbsp; 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)<br>[&nbsp;&nbsp;&nbsp; 0.000000] BIOS-provided physical RAM map:<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 0000000000100000 - 00000000bfe8cc00 (usable)<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000bfe8cc00 - 00000000bfe8ec00 (ACPI NVS)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000bfe8ec00 - 00000000bfe90c00 (ACPI data)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000bfe90c00 - 00000000c0000000 (reserved)<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp; BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)<br>[&nbsp;&nbsp;&nbsp; 0.000000] 2174MB HIGHMEM available.<br>[&nbsp;&nbsp;&nbsp; 0.000000] 896MB LOWMEM available.<br>
[&nbsp;&nbsp;&nbsp; 0.000000] found SMP MP-table at 000fe710<br>[&nbsp;&nbsp;&nbsp; 0.000000] Entering add_active_range(0, 0, 786060) 0 entries of 256 used<br>[&nbsp;&nbsp;&nbsp; 0.000000] Zone PFN ranges:<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; DMA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 -&gt;&nbsp;&nbsp;&nbsp;&nbsp; 4096<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; Normal&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 4096 -&gt;&nbsp;&nbsp; 229376<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; HighMem&nbsp;&nbsp;&nbsp; 229376 -&gt;&nbsp;&nbsp; 786060<br>[&nbsp;&nbsp;&nbsp; 0.000000] Movable zone start PFN for each node<br>[&nbsp;&nbsp;&nbsp; 0.000000] early_node_map[1] active PFN ranges<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp;&nbsp;&nbsp; 0:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 -&gt;&nbsp;&nbsp; 786060<br>[&nbsp;&nbsp;&nbsp; 0.000000] On node 0 totalpages: 786060<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; DMA zone: 32 pages used for memmap<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; DMA zone: 0 pages reserved<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; DMA zone: 4064 pages, LIFO batch:0<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; Normal zone: 1760 pages used for memmap<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; Normal zone: 223520 pages, LIFO batch:31<br>
[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; HighMem zone: 4349 pages used for memmap<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; HighMem zone: 552335 pages, LIFO batch:31<br>[&nbsp;&nbsp;&nbsp; 0.000000]&nbsp;&nbsp; Movable zone: 0 pages used for memmap<br>[&nbsp;&nbsp;&nbsp; 0.000000] DMI 2.3 present.<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: RSDP signature @ 0xC00FEBF0 checksum 0<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: RSDP 000FEBF0, 0014 (r0 DELL&nbsp; )<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: RSDT 000FCCBE, 003C (r1 DELL&nbsp;&nbsp;&nbsp; 8400&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 7 ASL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 61)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: FACP 000FCCFA, 0074 (r1 DELL&nbsp;&nbsp;&nbsp; 8400&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 7 ASL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 61)<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: DSDT FFFC67D1, 2AEE (r1&nbsp;&nbsp; DELL&nbsp;&nbsp;&nbsp; dt_ex&nbsp;&nbsp;&nbsp;&nbsp; 1000 MSFT&nbsp; 100000D)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: FACS BFE8CC00, 0040<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: SSDT FFFC94B6, 0096 (r1&nbsp;&nbsp; DELL&nbsp;&nbsp;&nbsp; st_ex&nbsp;&nbsp;&nbsp;&nbsp; 1000 MSFT&nbsp; 100000D)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: APIC 000FCD6E, 0072 (r1 DELL&nbsp;&nbsp;&nbsp; 8400&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 7 ASL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 61)<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: BOOT 000FCDE0, 0028 (r1 DELL&nbsp;&nbsp;&nbsp; 8400&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 7 ASL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 61)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: MCFG 000FCE08, 003E (r1 DELL&nbsp;&nbsp;&nbsp; 8400&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 7 ASL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 61)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: HPET 000FCE46, 0038 (r1 DELL&nbsp;&nbsp;&nbsp; 8400&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 7 ASL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 61)<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: PM-Timer IO Port: 0x808<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: Local APIC address 0xfee00000<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)<br>[&nbsp;&nbsp;&nbsp; 0.000000] Processor #0 15:3 APIC version 20<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)<br>[&nbsp;&nbsp;&nbsp; 0.000000] Processor #1 15:3 APIC version 20<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])<br>[&nbsp;&nbsp;&nbsp; 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: IRQ0 used by override.<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: IRQ2 used by override.<br>
[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: IRQ9 used by override.<br>[&nbsp;&nbsp;&nbsp; 0.000000] Enabling APIC mode:&nbsp; Flat.&nbsp; Using 1 I/O APICs<br>[&nbsp;&nbsp;&nbsp; 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000<br>[&nbsp;&nbsp;&nbsp; 0.000000] Using ACPI (MADT) for SMP configuration information<br>
[&nbsp;&nbsp;&nbsp; 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)<br>[&nbsp;&nbsp;&nbsp; 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000<br>[&nbsp;&nbsp;&nbsp; 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000<br>
[&nbsp;&nbsp;&nbsp; 0.000000] Built 1 zonelists in Zone order, mobility grouping on.&nbsp; Total pages: 779919<br>[&nbsp;&nbsp;&nbsp; 0.000000] Kernel command line: root=UUID=8ae296ce-00f8-409b-8eaa-34068a972eb1 ro quiet splash<br>[&nbsp;&nbsp;&nbsp; 0.000000] mapped APIC to ffffb000 (fee00000)<br>
[&nbsp;&nbsp;&nbsp; 0.000000] mapped IOAPIC to ffffa000 (fec00000)<br>[&nbsp;&nbsp;&nbsp; 0.000000] Enabling fast FPU save and restore... done.<br>[&nbsp;&nbsp;&nbsp; 0.000000] Enabling unmasked SIMD FPU exception support... done.<br>[&nbsp;&nbsp;&nbsp; 0.000000] Initializing CPU#0<br>
[&nbsp;&nbsp;&nbsp; 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)<br>[&nbsp;&nbsp;&nbsp; 0.000000] Detected 3192.220 MHz processor.<br>[&nbsp;&nbsp; 21.654905] Console: colour VGA+ 80x25<br>[&nbsp;&nbsp; 21.654908] console [tty0] enabled<br>[&nbsp;&nbsp; 21.655226] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)<br>
[&nbsp;&nbsp; 21.655552] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)<br>[&nbsp;&nbsp; 21.845157] Memory: 3105924k/3144240k available (2177k kernel code, 37068k reserved, 1006k data, 368k init, 2226736k highmem)<br>[&nbsp;&nbsp; 21.845166] virtual kernel memory layout:<br>
[&nbsp;&nbsp; 21.845167]&nbsp;&nbsp;&nbsp;&nbsp; fixmap&nbsp; : 0xfff4b000 - 0xfffff000&nbsp;&nbsp; ( 720 kB)<br>[&nbsp;&nbsp; 21.845168]&nbsp;&nbsp;&nbsp;&nbsp; pkmap&nbsp;&nbsp; : 0xff800000 - 0xffc00000&nbsp;&nbsp; (4096 kB)<br>[&nbsp;&nbsp; 21.845169]&nbsp;&nbsp;&nbsp;&nbsp; vmalloc : 0xf8800000 - 0xff7fe000&nbsp;&nbsp; ( 111 MB)<br>[&nbsp;&nbsp; 21.845170]&nbsp;&nbsp;&nbsp;&nbsp; lowmem&nbsp; : 0xc0000000 - 0xf8000000&nbsp;&nbsp; ( 896 MB)<br>
[&nbsp;&nbsp; 21.845170]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; .init : 0xc0421000 - 0xc047d000&nbsp;&nbsp; ( 368 kB)<br>[&nbsp;&nbsp; 21.845171]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; .data : 0xc03204c4 - 0xc041bdc4&nbsp;&nbsp; (1006 kB)<br>[&nbsp;&nbsp; 21.845172]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; .text : 0xc0100000 - 0xc03204c4&nbsp;&nbsp; (2177 kB)<br>[&nbsp;&nbsp; 21.845175] Checking if this processor honours the WP bit even in supervisor mode... Ok.<br>
[&nbsp;&nbsp; 21.845212] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1<br>[&nbsp;&nbsp; 21.845300] hpet clockevent registered<br>[&nbsp;&nbsp; 21.925105] Calibrating delay using timer specific routine.. 6389.75 BogoMIPS (lpj=12779514)<br>
[&nbsp;&nbsp; 21.925127] Security Framework initialized<br>[&nbsp;&nbsp; 21.925132] SELinux:&nbsp; Disabled at boot.<br>[&nbsp;&nbsp; 21.925145] AppArmor: AppArmor initialized<br>[&nbsp;&nbsp; 21.925149] Failure registering capabilities with primary security module.<br>
[&nbsp;&nbsp; 21.925157] Mount-cache hash table entries: 512<br>[&nbsp;&nbsp; 21.925276] Initializing cgroup subsys ns<br>[&nbsp;&nbsp; 21.925281] Initializing cgroup subsys cpuacct<br>[&nbsp;&nbsp; 21.925293] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000<br>
[&nbsp;&nbsp; 21.925301] monitor/mwait feature present.<br>[&nbsp;&nbsp; 21.925303] using mwait in idle threads.<br>[&nbsp;&nbsp; 21.925307] CPU: Trace cache: 12K uops, L1 D cache: 16K<br>[&nbsp;&nbsp; 21.925310] CPU: L2 cache: 1024K<br>[&nbsp;&nbsp; 21.925312] CPU: Physical Processor ID: 0<br>
[&nbsp;&nbsp; 21.925314] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000<br>[&nbsp;&nbsp; 21.925324] Compat vDSO mapped to ffffe000.<br>[&nbsp;&nbsp; 21.925339] Checking &#39;hlt&#39; instruction... OK.<br>
[&nbsp;&nbsp; 21.941483] SMP alternatives: switching to UP code<br>[&nbsp;&nbsp; 21.943231] Early unpacking initramfs... done<br>[&nbsp;&nbsp; 22.223941] ACPI: Core revision 20070126<br>[&nbsp;&nbsp; 22.238998] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.<br>
[&nbsp;&nbsp; 22.268384] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04<br>[&nbsp;&nbsp; 22.268402] SMP alternatives: switching to SMP code<br>[&nbsp;&nbsp; 22.269124] Booting processor 1/1 eip 3000<br>[&nbsp;&nbsp; 22.279297] Initializing CPU#1<br>[&nbsp;&nbsp; 22.356017] Calibrating delay using timer specific routine.. 6384.06 BogoMIPS (lpj=12768132)<br>
[&nbsp;&nbsp; 22.356027] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000<br>[&nbsp;&nbsp; 22.356034] monitor/mwait feature present.<br>[&nbsp;&nbsp; 22.356039] CPU: Trace cache: 12K uops, L1 D cache: 16K<br>
[&nbsp;&nbsp; 22.356042] CPU: L2 cache: 1024K<br>[&nbsp;&nbsp; 22.356044] CPU: Physical Processor ID: 0<br>[&nbsp;&nbsp; 22.356046] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000<br>[&nbsp;&nbsp; 22.356412] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04<br>
[&nbsp;&nbsp; 22.356452] Total of 2 processors activated (12773.82 BogoMIPS).<br>[&nbsp;&nbsp; 22.356600] ENABLING IO-APIC IRQs<br>[&nbsp;&nbsp; 22.356777] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1<br>[&nbsp;&nbsp; 22.503774] checking TSC synchronization [CPU#0 -&gt; CPU#1]: passed.<br>
[&nbsp;&nbsp; 22.523740] Brought up 2 CPUs<br>[&nbsp;&nbsp; 22.523766] CPU0 attaching sched-domain:<br>[&nbsp;&nbsp; 22.523770]&nbsp; domain 0: span 03<br>[&nbsp;&nbsp; 22.523772]&nbsp;&nbsp; groups: 01 02<br>[&nbsp;&nbsp; 22.523775]&nbsp;&nbsp; domain 1: span 03<br>[&nbsp;&nbsp; 22.523777]&nbsp;&nbsp;&nbsp; groups: 03<br>
[&nbsp;&nbsp; 22.523779] CPU1 attaching sched-domain:<br>[&nbsp;&nbsp; 22.523781]&nbsp; domain 0: span 03<br>[&nbsp;&nbsp; 22.523783]&nbsp;&nbsp; groups: 02 01<br>[&nbsp;&nbsp; 22.523786]&nbsp;&nbsp; domain 1: span 03<br>[&nbsp;&nbsp; 22.523787]&nbsp;&nbsp;&nbsp; groups: 03<br>[&nbsp;&nbsp; 22.524038] net_namespace: 64 bytes<br>
[&nbsp;&nbsp; 22.524050] Booting paravirtualized kernel on bare hardware<br>[&nbsp;&nbsp; 22.524590] Time: 10:57:02&nbsp; Date: 09/21/08<br>[&nbsp;&nbsp; 22.524614] NET: Registered protocol family 16<br>[&nbsp;&nbsp; 22.524872] EISA bus registered<br>[&nbsp;&nbsp; 22.524878] ACPI: bus type pci registered<br>
[&nbsp;&nbsp; 22.525024] PCI: PCI BIOS revision 2.10 entry at 0xfb76a, last bus=4<br>[&nbsp;&nbsp; 22.525026] PCI: Using configuration type 1<br>[&nbsp;&nbsp; 22.525047] Setting up standard PCI resources<br>[&nbsp;&nbsp; 22.526756] ACPI: EC: Look up EC in DSDT<br>
[&nbsp;&nbsp; 22.549756] ACPI: Interpreter enabled<br>[&nbsp;&nbsp; 22.549760] ACPI: (supports S0 S1 S4 S5)<br>[&nbsp;&nbsp; 22.549776] ACPI: Using IOAPIC for interrupt routing<br>[&nbsp;&nbsp; 22.582176] ACPI: PCI Root Bridge [PCI0] (0000:00)<br>[&nbsp;&nbsp; 22.582708] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO<br>
[&nbsp;&nbsp; 22.582712] PCI quirk: region 0880-08bf claimed by ICH6 GPIO<br>[&nbsp;&nbsp; 22.583498] PCI: Transparent bridge - 0000:00:1e.0<br>[&nbsp;&nbsp; 22.583531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]<br>[&nbsp;&nbsp; 22.583966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]<br>
[&nbsp;&nbsp; 22.584479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]<br>[&nbsp;&nbsp; 22.584743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]<br>[&nbsp;&nbsp; 22.585003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]<br>
[&nbsp;&nbsp; 22.835388] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)<br>[&nbsp;&nbsp; 22.835714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)<br>[&nbsp;&nbsp; 22.836035] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)<br>
[&nbsp;&nbsp; 22.836355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.<br>[&nbsp;&nbsp; 22.836680] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)<br>[&nbsp;&nbsp; 22.837001] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)<br>
[&nbsp;&nbsp; 22.837325] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)<br>[&nbsp;&nbsp; 22.837646] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)<br>[&nbsp;&nbsp; 22.837898] Linux Plug and Play Support v0.97 (c) Adam Belay<br>
[&nbsp;&nbsp; 22.837938] pnp: PnP ACPI init<br>[&nbsp;&nbsp; 22.837946] ACPI: bus type pnp registered<br>[&nbsp;&nbsp; 22.860084] pnp: PnP ACPI: found 11 devices<br>[&nbsp;&nbsp; 22.860087] ACPI: ACPI bus type pnp unregistered<br>[&nbsp;&nbsp; 22.860091] PnPBIOS: Disabled by ACPI PNP<br>
[&nbsp;&nbsp; 22.860381] PCI: Using ACPI for IRQ routing<br>[&nbsp;&nbsp; 22.860385] PCI: If a device doesn&#39;t work, try &quot;pci=routeirq&quot;.&nbsp; If it helps, post a report<br>[&nbsp;&nbsp; 22.886695] NET: Registered protocol family 8<br>[&nbsp;&nbsp; 22.886698] NET: Registered protocol family 20<br>
[&nbsp;&nbsp; 22.886739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0<br>[&nbsp;&nbsp; 22.886744] hpet0: 3 64-bit timers, 14318180 Hz<br>[&nbsp;&nbsp; 22.887782] AppArmor: AppArmor Filesystem Enabled<br>[&nbsp;&nbsp; 22.890676] Time: tsc clocksource has been installed.<br>
[&nbsp;&nbsp; 22.890692] Switched to high resolution mode on CPU 0<br>[&nbsp;&nbsp; 22.890810] Switched to high resolution mode on CPU 1<br>[&nbsp;&nbsp; 22.902643] system 00:01: ioport range 0x800-0x85f has been reserved<br>[&nbsp;&nbsp; 22.902646] system 00:01: ioport range 0xc00-0xc7f has been reserved<br>
[&nbsp;&nbsp; 22.902649] system 00:01: ioport range 0x860-0x8ff could not be reserved<br>[&nbsp;&nbsp; 22.902660] system 00:08: iomem range 0x0-0x9ffff could not be reserved<br>[&nbsp;&nbsp; 22.902663] system 00:08: iomem range 0x100000-0xffffff could not be reserved<br>
[&nbsp;&nbsp; 22.902666] system 00:08: iomem range 0x1000000-0xbfe8cbff could not be reserved<br>[&nbsp;&nbsp; 22.902668] system 00:08: iomem range 0xc0000-0xfffff could not be reserved<br>[&nbsp;&nbsp; 22.902671] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved<br>
[&nbsp;&nbsp; 22.902673] system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved<br>[&nbsp;&nbsp; 22.902676] system 00:08: iomem range 0xfed20000-0xfed9ffff could not be reserved<br>[&nbsp;&nbsp; 22.902679] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved<br>
[&nbsp;&nbsp; 22.902681] system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved<br>[&nbsp;&nbsp; 22.902687] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved<br>[&nbsp;&nbsp; 22.902690] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved<br>
[&nbsp;&nbsp; 22.933152] PCI: Bridge: 0000:00:01.0<br>[&nbsp;&nbsp; 22.933155]&nbsp;&nbsp; IO window: d000-dfff<br>[&nbsp;&nbsp; 22.933159]&nbsp;&nbsp; MEM window: dd000000-dfefffff<br>[&nbsp;&nbsp; 22.933162]&nbsp;&nbsp; PREFETCH window: c0000000-cfffffff<br>[&nbsp;&nbsp; 22.933166] PCI: Bridge: 0000:00:1c.0<br>
[&nbsp;&nbsp; 22.933168]&nbsp;&nbsp; IO window: disabled.<br>[&nbsp;&nbsp; 22.933172]&nbsp;&nbsp; MEM window: dcf00000-dcffffff<br>[&nbsp;&nbsp; 22.933176]&nbsp;&nbsp; PREFETCH window: disabled.<br>[&nbsp;&nbsp; 22.933180] PCI: Bridge: 0000:00:1c.1<br>[&nbsp;&nbsp; 22.933182]&nbsp;&nbsp; IO window: disabled.<br>
[&nbsp;&nbsp; 22.933186]&nbsp;&nbsp; MEM window: dce00000-dcefffff<br>[&nbsp;&nbsp; 22.933190]&nbsp;&nbsp; PREFETCH window: disabled.<br>[&nbsp;&nbsp; 22.933195] PCI: Bridge: 0000:00:1e.0<br>[&nbsp;&nbsp; 22.933197]&nbsp;&nbsp; IO window: c000-cfff<br>[&nbsp;&nbsp; 22.933202]&nbsp;&nbsp; MEM window: dcd00000-dcdfffff<br>
[&nbsp;&nbsp; 22.933205]&nbsp;&nbsp; PREFETCH window: disabled.<br>[&nbsp;&nbsp; 22.933225] ACPI: PCI Interrupt 0000:00:01.0[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[&nbsp;&nbsp; 22.933231] PCI: Setting latency timer of device 0000:00:01.0 to 64<br>[&nbsp;&nbsp; 22.933249] ACPI: PCI Interrupt 0000:00:1c.0[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>
[&nbsp;&nbsp; 22.933254] PCI: Setting latency timer of device 0000:00:1c.0 to 64<br>[&nbsp;&nbsp; 22.933272] ACPI: PCI Interrupt 0000:00:1c.1[B] -&gt; GSI 17 (level, low) -&gt; IRQ 17<br>[&nbsp;&nbsp; 22.933277] PCI: Setting latency timer of device 0000:00:1c.1 to 64<br>
[&nbsp;&nbsp; 22.933288] PCI: Setting latency timer of device 0000:00:1e.0 to 64<br>[&nbsp;&nbsp; 22.933298] NET: Registered protocol family 2<br>[&nbsp;&nbsp; 22.970500] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)<br>[&nbsp;&nbsp; 22.970795] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)<br>
[&nbsp;&nbsp; 22.971344] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)<br>[&nbsp;&nbsp; 22.971643] TCP: Hash tables configured (established 131072 bind 65536)<br>[&nbsp;&nbsp; 22.971646] TCP reno registered<br>[&nbsp;&nbsp; 22.982559] checking if image is initramfs... it is<br>
[&nbsp;&nbsp; 23.537754] Freeing initrd memory: 7464k freed<br>[&nbsp;&nbsp; 23.537899] Simple Boot Flag value 0x87 read from CMOS RAM was invalid<br>[&nbsp;&nbsp; 23.537902] Simple Boot Flag at 0x7a set to 0x1<br>[&nbsp;&nbsp; 23.538387] audit: initializing netlink socket (disabled)<br>
[&nbsp;&nbsp; 23.538400] audit(1221994622.572:1): initialized<br>[&nbsp;&nbsp; 23.538662] highmem bounce pool size: 64 pages<br>[&nbsp;&nbsp; 23.541002] VFS: Disk quotas dquot_6.5.1<br>[&nbsp;&nbsp; 23.541099] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<br>
[&nbsp;&nbsp; 23.541250] io scheduler noop registered<br>[&nbsp;&nbsp; 23.541253] io scheduler anticipatory registered<br>[&nbsp;&nbsp; 23.541255] io scheduler deadline registered<br>[&nbsp;&nbsp; 23.541266] io scheduler cfq registered (default)<br>[&nbsp;&nbsp; 23.541362] Boot video device is 0000:01:00.0<br>
[&nbsp;&nbsp; 23.541483] PCI: Setting latency timer of device 0000:00:01.0 to 64<br>[&nbsp;&nbsp; 23.541523] assign_interrupt_mode Found MSI capability<br>[&nbsp;&nbsp; 23.541556] Allocate Port Service[0000:00:01.0:pcie00]<br>[&nbsp;&nbsp; 23.541647] PCI: Setting latency timer of device 0000:00:1c.0 to 64<br>
[&nbsp;&nbsp; 23.541689] assign_interrupt_mode Found MSI capability<br>[&nbsp;&nbsp; 23.541724] Allocate Port Service[0000:00:1c.0:pcie00]<br>[&nbsp;&nbsp; 23.541766] Allocate Port Service[0000:00:1c.0:pcie02]<br>[&nbsp;&nbsp; 23.541859] PCI: Setting latency timer of device 0000:00:1c.1 to 64<br>
[&nbsp;&nbsp; 23.541901] assign_interrupt_mode Found MSI capability<br>[&nbsp;&nbsp; 23.541936] Allocate Port Service[0000:00:1c.1:pcie00]<br>[&nbsp;&nbsp; 23.541978] Allocate Port Service[0000:00:1c.1:pcie02]<br>[&nbsp;&nbsp; 23.542287] isapnp: Scanning for PnP cards...<br>
[&nbsp;&nbsp; 23.893052] isapnp: No Plug &amp; Play device found<br>[&nbsp;&nbsp; 23.928604] Real Time Clock Driver v1.12ac<br>[&nbsp;&nbsp; 23.928829] hpet_resources: 0xfed00000 is busy<br>[&nbsp;&nbsp; 23.928847] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled<br>
[&nbsp;&nbsp; 23.928978] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A<br>[&nbsp;&nbsp; 23.929765] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A<br>[&nbsp;&nbsp; 23.930700] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize<br>
[&nbsp;&nbsp; 23.930776] input: Macintosh mouse button emulation as /devices/virtual/input/input0<br>[&nbsp;&nbsp; 23.930957] PNP: No PS/2 controller found. Probing ports directly.<br>[&nbsp;&nbsp; 23.933509] serio: i8042 KBD port at 0x60,0x64 irq 1<br>
[&nbsp;&nbsp; 23.933516] serio: i8042 AUX port at 0x60,0x64 irq 12<br>[&nbsp;&nbsp; 23.944180] mice: PS/2 mouse device common for all mice<br>[&nbsp;&nbsp; 23.944330] EISA: Probing bus 0 at eisa.0<br>[&nbsp;&nbsp; 23.944359] EISA: Detected 0 cards.<br>[&nbsp;&nbsp; 23.944362] cpuidle: using governor ladder<br>
[&nbsp;&nbsp; 23.944365] cpuidle: using governor menu<br>[&nbsp;&nbsp; 23.944439] NET: Registered protocol family 1<br>[&nbsp;&nbsp; 23.944469] Using IPI No-Shortcut mode<br>[&nbsp;&nbsp; 23.944497] registered taskstats version 1<br>[&nbsp;&nbsp; 23.944592]&nbsp;&nbsp; Magic number: 8:99:983<br>
[&nbsp;&nbsp; 23.944680] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found<br>[&nbsp;&nbsp; 23.944682] EDD information not available.<br>[&nbsp;&nbsp; 23.944875] Freeing unused kernel memory: 368k freed<br>[&nbsp;&nbsp; 25.175523] fuse init (API version 7.9)<br>
[&nbsp;&nbsp; 25.389692] usbcore: registered new interface driver usbfs<br>[&nbsp;&nbsp; 25.389724] usbcore: registered new interface driver hub<br>[&nbsp;&nbsp; 25.396529] usbcore: registered new device driver usb<br>[&nbsp;&nbsp; 25.405050] USB Universal Host Controller Interface driver v3.0<br>
[&nbsp;&nbsp; 25.405119] ACPI: PCI Interrupt 0000:00:1d.0[A] -&gt; GSI 21 (level, low) -&gt; IRQ 18<br>[&nbsp;&nbsp; 25.405135] PCI: Setting latency timer of device 0000:00:1d.0 to 64<br>[&nbsp;&nbsp; 25.405141] uhci_hcd 0000:00:1d.0: UHCI Host Controller<br>
[&nbsp;&nbsp; 25.405373] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1<br>[&nbsp;&nbsp; 25.405411] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80<br>[&nbsp;&nbsp; 25.405606] usb usb1: configuration #1 chosen from 1 choice<br>
[&nbsp;&nbsp; 25.405649] hub 1-0:1.0: USB hub found<br>[&nbsp;&nbsp; 25.405658] hub 1-0:1.0: 2 ports detected<br>[&nbsp;&nbsp; 25.508258] ACPI: PCI Interrupt 0000:00:1d.1[B] -&gt; GSI 22 (level, low) -&gt; IRQ 19<br>[&nbsp;&nbsp; 25.508274] PCI: Setting latency timer of device 0000:00:1d.1 to 64<br>
[&nbsp;&nbsp; 25.508279] uhci_hcd 0000:00:1d.1: UHCI Host Controller<br>[&nbsp;&nbsp; 25.508312] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2<br>[&nbsp;&nbsp; 25.508343] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60<br>[&nbsp;&nbsp; 25.508497] usb usb2: configuration #1 chosen from 1 choice<br>
[&nbsp;&nbsp; 25.508533] hub 2-0:1.0: USB hub found<br>[&nbsp;&nbsp; 25.508542] hub 2-0:1.0: 2 ports detected<br>[&nbsp;&nbsp; 25.612015] ACPI: PCI Interrupt 0000:00:1d.2[C] -&gt; GSI 18 (level, low) -&gt; IRQ 20<br>[&nbsp;&nbsp; 25.612031] PCI: Setting latency timer of device 0000:00:1d.2 to 64<br>
[&nbsp;&nbsp; 25.612036] uhci_hcd 0000:00:1d.2: UHCI Host Controller<br>[&nbsp;&nbsp; 25.612069] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3<br>[&nbsp;&nbsp; 25.612100] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40<br>[&nbsp;&nbsp; 25.612256] usb usb3: configuration #1 chosen from 1 choice<br>
[&nbsp;&nbsp; 25.612292] hub 3-0:1.0: USB hub found<br>[&nbsp;&nbsp; 25.612300] hub 3-0:1.0: 2 ports detected<br>[&nbsp;&nbsp; 25.715756] ACPI: PCI Interrupt 0000:00:1d.3[D] -&gt; GSI 23 (level, low) -&gt; IRQ 21<br>[&nbsp;&nbsp; 25.715771] PCI: Setting latency timer of device 0000:00:1d.3 to 64<br>
[&nbsp;&nbsp; 25.715776] uhci_hcd 0000:00:1d.3: UHCI Host Controller<br>[&nbsp;&nbsp; 25.715809] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4<br>[&nbsp;&nbsp; 25.715839] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20<br>[&nbsp;&nbsp; 25.715992] usb usb4: configuration #1 chosen from 1 choice<br>
[&nbsp;&nbsp; 25.716029] hub 4-0:1.0: USB hub found<br>[&nbsp;&nbsp; 25.716037] hub 4-0:1.0: 2 ports detected<br>[&nbsp;&nbsp; 25.808730] SCSI subsystem initialized<br>[&nbsp;&nbsp; 25.820726] ACPI: PCI Interrupt 0000:00:1d.7[A] -&gt; GSI 21 (level, low) -&gt; IRQ 18<br>
[&nbsp;&nbsp; 25.820745] PCI: Setting latency timer of device 0000:00:1d.7 to 64<br>[&nbsp;&nbsp; 25.820750] ehci_hcd 0000:00:1d.7: EHCI Host Controller<br>[&nbsp;&nbsp; 25.820815] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5<br>
[&nbsp;&nbsp; 25.824727] ehci_hcd 0000:00:1d.7: debug port 1<br>[&nbsp;&nbsp; 25.824738] PCI: cache line size of 128 is not supported by device 0000:00:1d.7<br>[&nbsp;&nbsp; 25.824752] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800<br>[&nbsp;&nbsp; 25.851307] usb 2-1: new full speed USB device using uhci_hcd and address 2<br>
[&nbsp;&nbsp; 25.864253] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004<br>[&nbsp;&nbsp; 25.864429] usb usb5: configuration #1 chosen from 1 choice<br>[&nbsp;&nbsp; 25.864468] hub 5-0:1.0: USB hub found<br>[&nbsp;&nbsp; 25.864477] hub 5-0:1.0: 8 ports detected<br>
[&nbsp;&nbsp; 25.892719] libata version 3.00 loaded.<br>[&nbsp;&nbsp; 25.968165] ACPI: PCI Interrupt 0000:04:00.0[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[&nbsp;&nbsp; 25.968205] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)<br>
[&nbsp;&nbsp; 25.968213] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)<br>[&nbsp;&nbsp; 25.968221] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)<br>[&nbsp;&nbsp; 25.968229] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)<br>
[&nbsp;&nbsp; 25.968237] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)<br>[&nbsp;&nbsp; 25.971611] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0<br>[&nbsp;&nbsp; 25.971765] tg3.c:v3.86 (November 9, 2007)<br>[&nbsp;&nbsp; 25.971790] ACPI: PCI Interrupt 0000:02:00.0[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>
[&nbsp;&nbsp; 25.971803] PCI: Setting latency timer of device 0000:02:00.0 to 64<br>[&nbsp;&nbsp; 25.991739] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:11:6a:25:ce<br>[&nbsp;&nbsp; 25.991753] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]<br>
[&nbsp;&nbsp; 25.991758] eth0: dma_rwctrl[76180000] dma_mask[64-bit]<br>[&nbsp;&nbsp; 25.992005] ACPI: PCI Interrupt 0000:00:1f.1[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>[&nbsp;&nbsp; 25.992054] PCI: Setting latency timer of device 0000:00:1f.1 to 64<br>
[&nbsp;&nbsp; 25.992070] ACPI: PCI interrupt for device 0000:00:1f.1 disabled<br>[&nbsp;&nbsp; 25.998670] ahci 0000:00:1f.2: version 3.0<br>[&nbsp;&nbsp; 25.998693] ACPI: PCI Interrupt 0000:00:1f.2[C] -&gt; GSI 20 (level, low) -&gt; IRQ 22<br>[&nbsp;&nbsp; 26.781958] usb 5-4: new high speed USB device using ehci_hcd and address 3<br>
[&nbsp;&nbsp; 26.915571] usb 5-4: configuration #1 chosen from 3 choices<br>[&nbsp;&nbsp; 26.996440] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode<br>[&nbsp;&nbsp; 26.996445] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part <br>
[&nbsp;&nbsp; 26.996450] PCI: Setting latency timer of device 0000:00:1f.2 to 64<br>[&nbsp;&nbsp; 26.996737] scsi0 : ahci<br>[&nbsp;&nbsp; 26.996960] scsi1 : ahci<br>[&nbsp;&nbsp; 26.997113] scsi2 : ahci<br>[&nbsp;&nbsp; 26.997261] scsi3 : ahci<br>[&nbsp;&nbsp; 26.997302] ata1: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd00 irq 22<br>
[&nbsp;&nbsp; 26.997307] ata2: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd80 irq 22<br>[&nbsp;&nbsp; 26.997311] ata3: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe00 irq 22<br>[&nbsp;&nbsp; 26.997315] ata4: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe80 irq 22<br>
[&nbsp;&nbsp; 27.471243] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)<br>[&nbsp;&nbsp; 27.475256] ata1.00: ATA-6: WDC WD1600JD-75HBB0, 08.02D08, max UDMA/133<br>[&nbsp;&nbsp; 27.475260] ata1.00: 312500000 sectors, multi 8: LBA48 <br>[&nbsp;&nbsp; 27.480525] ata1.00: configured for UDMA/133<br>
[&nbsp;&nbsp; 27.583956] usb 4-1: new full speed USB device using uhci_hcd and address 2<br>[&nbsp;&nbsp; 27.783824] usb 4-1: configuration #1 chosen from 1 choice<br>[&nbsp;&nbsp; 27.954045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)<br>[&nbsp;&nbsp; 27.954581] ata2.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133<br>
[&nbsp;&nbsp; 27.954585] ata2.00: 488397168 sectors, multi 8: LBA48 <br>[&nbsp;&nbsp; 27.955189] ata2.00: configured for UDMA/133<br>[&nbsp;&nbsp; 28.025860] usb 4-2: new low speed USB device using uhci_hcd and address 3<br>[&nbsp;&nbsp; 28.202771] usb 4-2: configuration #1 chosen from 1 choice<br>
[&nbsp;&nbsp; 28.265259] ata3: SATA link down (SStatus 0 SControl 300)<br>[&nbsp;&nbsp; 28.444808] usb 2-1: new full speed USB device using uhci_hcd and address 3<br>[&nbsp;&nbsp; 28.576483] ata4: SATA link down (SStatus 0 SControl 300)<br>[&nbsp;&nbsp; 28.576616] scsi 0:0:0:0: Direct-Access&nbsp;&nbsp;&nbsp;&nbsp; ATA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; WDC WD1600JD-75H 08.0 PQ: 0 ANSI: 5<br>
[&nbsp;&nbsp; 28.576784] scsi 1:0:0:0: Direct-Access&nbsp;&nbsp;&nbsp;&nbsp; ATA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5<br>[&nbsp;&nbsp; 28.577382] ata_piix 0000:00:1f.1: version 2.12<br>[&nbsp;&nbsp; 28.577401] ACPI: PCI Interrupt 0000:00:1f.1[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>
[&nbsp;&nbsp; 28.577443] PCI: Setting latency timer of device 0000:00:1f.1 to 64<br>[&nbsp;&nbsp; 28.577509] scsi4 : ata_piix<br>[&nbsp;&nbsp; 28.577738] scsi5 : ata_piix<br>[&nbsp;&nbsp; 28.577782] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14<br>
[&nbsp;&nbsp; 28.577786] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15<br>[&nbsp;&nbsp; 28.625697] usb 2-1: configuration #1 chosen from 1 choice<br>[&nbsp;&nbsp; 28.628777] usbcore: registered new interface driver hiddev<br>[&nbsp;&nbsp; 28.642783] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input1<br>
[&nbsp;&nbsp; 28.664302] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2<br>[&nbsp;&nbsp; 28.692425] Fixing up Logitech keyboard report descriptor<br>[&nbsp;&nbsp; 28.692996] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.1/input/input2<br>
[&nbsp;&nbsp; 28.724200] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2<br>[&nbsp;&nbsp; 28.724226] usbcore: registered new interface driver usbhid<br>[&nbsp;&nbsp; 28.724232] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver<br>
[&nbsp;&nbsp; 29.051743] ata5.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33<br>[&nbsp;&nbsp; 29.051770] ata5.01: ATAPI: _NEC DVD+/-RW ND-3450A, 102B, max UDMA/33<br>[&nbsp;&nbsp; 29.216269] ata5.00: configured for UDMA/33<br>[&nbsp;&nbsp; 29.386846] ata5.01: configured for UDMA/33<br>
[&nbsp;&nbsp; 29.386892] ata6: port disabled. ignoring.<br>[&nbsp;&nbsp; 29.387408] scsi 4:0:0:0: CD-ROM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; SAMSUNG&nbsp; DVD-ROM SD-616E&nbsp; F501 PQ: 0 ANSI: 5<br>[&nbsp;&nbsp; 29.389328] scsi 4:0:1:0: CD-ROM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; _NEC&nbsp;&nbsp;&nbsp;&nbsp; DVD+-RW ND-3450A 102B PQ: 0 ANSI: 5<br>
[&nbsp;&nbsp; 29.408772] Driver &#39;sd&#39; needs updating - please use bus_type methods<br>[&nbsp;&nbsp; 29.408978] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)<br>[&nbsp;&nbsp; 29.409000] sd 0:0:0:0: [sda] Write Protect is off<br>
[&nbsp;&nbsp; 29.409004] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<br>[&nbsp;&nbsp; 29.409034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn&#39;t support DPO or FUA<br>[&nbsp;&nbsp; 29.409113] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)<br>
[&nbsp;&nbsp; 29.409133] sd 0:0:0:0: [sda] Write Protect is off<br>[&nbsp;&nbsp; 29.409137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<br>[&nbsp;&nbsp; 29.409177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn&#39;t support DPO or FUA<br>
[&nbsp;&nbsp; 29.409185]&nbsp; sda:&lt;4&gt;Driver &#39;sr&#39; needs updating - please use bus_type methods<br>[&nbsp;&nbsp; 29.477351]&nbsp; sda1 sda2 sda3 &lt; sda5 &gt;<br>[&nbsp;&nbsp; 29.510849] sd 0:0:0:0: [sda] Attached SCSI disk<br>[&nbsp;&nbsp; 29.510939] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)<br>
[&nbsp;&nbsp; 29.510961] sd 1:0:0:0: [sdb] Write Protect is off<br>[&nbsp;&nbsp; 29.510965] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00<br>[&nbsp;&nbsp; 29.510998] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn&#39;t support DPO or FUA<br>
[&nbsp;&nbsp; 29.511066] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)<br>[&nbsp;&nbsp; 29.511084] sd 1:0:0:0: [sdb] Write Protect is off<br>[&nbsp;&nbsp; 29.511088] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00<br>[&nbsp;&nbsp; 29.511119] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn&#39;t support DPO or FUA<br>
[&nbsp;&nbsp; 29.511125]&nbsp; sdb: sdb1<br>[&nbsp;&nbsp; 29.518556] sd 1:0:0:0: [sdb] Attached SCSI disk<br>[&nbsp;&nbsp; 29.525955] sd 0:0:0:0: Attached scsi generic sg0 type 0<br>[&nbsp;&nbsp; 29.525983] sd 1:0:0:0: Attached scsi generic sg1 type 0<br>[&nbsp;&nbsp; 29.526004] sr 4:0:0:0: Attached scsi generic sg2 type 5<br>
[&nbsp;&nbsp; 29.526023] scsi 4:0:1:0: Attached scsi generic sg3 type 5<br>[&nbsp;&nbsp; 29.526269] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray<br>[&nbsp;&nbsp; 29.526276] Uniform CD-ROM driver Revision: 3.20<br>[&nbsp;&nbsp; 29.526356] sr 4:0:0:0: Attached scsi CD-ROM sr0<br>
[&nbsp;&nbsp; 29.528289] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray<br>[&nbsp;&nbsp; 29.528377] sr 4:0:1:0: Attached scsi CD-ROM sr1<br>[&nbsp;&nbsp; 29.979135] Attempting manual resume<br>[&nbsp;&nbsp; 29.979139] swsusp: Resume From Partition 8:5<br>
[&nbsp;&nbsp; 29.979141] PM: Checking swsusp image.<br>[&nbsp;&nbsp; 29.979250] PM: Resume from disk failed.<br>[&nbsp;&nbsp; 30.025747] kjournald starting.&nbsp; Commit interval 5 seconds<br>[&nbsp;&nbsp; 30.025761] EXT3-fs: mounted filesystem with ordered data mode.<br>
[&nbsp;&nbsp; 41.893135] input: PC Speaker as /devices/platform/pcspkr/input/input3<br>[&nbsp;&nbsp; 42.079929] intel_rng: Firmware space is locked read-only. If you can&#39;t or<br>[&nbsp;&nbsp; 42.079933] intel_rng: don&#39;t want to disable this in firmware setup, and if<br>
[&nbsp;&nbsp; 42.079935] intel_rng: you are certain that your system has a functional<br>[&nbsp;&nbsp; 42.079937] intel_rng: RNG, try using the &#39;no_fwh_detect&#39; option.<br>[&nbsp;&nbsp; 42.169215] parport_pc 00:06: reported by Plug and Play ACPI<br>
[&nbsp;&nbsp; 42.169277] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]<br>[&nbsp;&nbsp; 42.211726] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)<br>[&nbsp;&nbsp; 42.338241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5<br>
[&nbsp;&nbsp; 42.403914] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4<br>[&nbsp;&nbsp; 42.483626] iTCO_vendor_support: vendor-support=0<br>[&nbsp;&nbsp; 42.545699] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)<br>[&nbsp;&nbsp; 42.545815] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)<br>
[&nbsp;&nbsp; 42.545858] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)<br>[&nbsp;&nbsp; 42.774586] input: Power Button (FF) as /devices/virtual/input/input4<br>[&nbsp;&nbsp; 42.814026] ACPI: Power Button (FF) [PWRF]<br>[&nbsp;&nbsp; 42.814110] input: Power Button (CM) as /devices/virtual/input/input5<br>
[&nbsp;&nbsp; 42.861926] ACPI: Power Button (CM) [VBTN]<br>[&nbsp;&nbsp; 43.400614] Linux agpgart interface v0.102<br>[&nbsp;&nbsp; 43.719365] nvidia: module license &#39;NVIDIA&#39; taints kernel.<br>[&nbsp;&nbsp; 44.558593] ACPI: PCI Interrupt 0000:01:00.0[A] -&gt; GSI 16 (level, low) -&gt; IRQ 16<br>
[&nbsp;&nbsp; 44.558611] PCI: Setting latency timer of device 0000:01:00.0 to 64<br>[&nbsp;&nbsp; 44.579377] NVRM: loading NVIDIA UNIX x86 Kernel Module&nbsp; 169.12&nbsp; Thu Feb 14 17:53:07 PST 2008<br>[&nbsp;&nbsp; 44.596584] Linux video capture interface: v2.00<br>
[&nbsp;&nbsp; 44.711967] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(ZC3XX) <br>[&nbsp;&nbsp; 45.095216] b43-phy0: Broadcom 4306 WLAN found<br>[&nbsp;&nbsp; 45.116313] b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2<br>
[&nbsp;&nbsp; 45.116338] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2<br>[&nbsp;&nbsp; 45.145218] phy0: Selected rate control algorithm &#39;simple&#39;<br>[&nbsp;&nbsp; 45.342201] ACPI: PCI Interrupt 0000:04:01.0[A] -&gt; GSI 17 (level, low) -&gt; IRQ 17<br>
[&nbsp;&nbsp; 45.342231] snd-ca0106: Model 1007 Rev 00000000 Serial 10071102<br>[&nbsp;&nbsp; 45.443550] usbcore: registered new interface driver gspca<br>[&nbsp;&nbsp; 45.443559] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered<br>
[&nbsp;&nbsp; 45.476856] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10<br>[&nbsp;&nbsp; 45.476918] usbcore: registered new interface driver zc0301<br>[&nbsp;&nbsp; 46.139356] udev: renamed network interface wlan0 to eth1<br>
[&nbsp;&nbsp; 46.347461] lp0: using parport0 (interrupt-driven).<br>[&nbsp;&nbsp; 46.405056] tun: Universal TUN/TAP device driver, 1.6<br>[&nbsp;&nbsp; 46.405061] tun: (C) 1999-2004 Max Krasnyansky &lt;<a href="mailto:maxk@qualcomm.com">maxk@qualcomm.com</a>&gt;<br>
[&nbsp;&nbsp; 46.472611] Adding 3196892k swap on /dev/sda5.&nbsp; Priority:-1 extents:1 across:3196892k<br>[&nbsp;&nbsp; 47.038689] EXT3 FS on sda2, internal journal<br>[&nbsp;&nbsp; 49.229114] ip_tables: (C) 2000-2006 Netfilter Core Team<br>[&nbsp;&nbsp; 50.704628] RPC: Registered udp transport module.<br>
[&nbsp;&nbsp; 50.704636] RPC: Registered tcp transport module.<br>[&nbsp;&nbsp; 51.527164] No dock devices found.<br>[&nbsp;&nbsp; 53.548952] ppdev: user-space parallel port driver<br>[&nbsp;&nbsp; 53.741584] audit(1221962253.545:2): type=1503 operation=&quot;inode_permission&quot; requested_mask=&quot;a::&quot; denied_mask=&quot;a::&quot; name=&quot;/dev/tty&quot; pid=5361 profile=&quot;/usr/sbin/cupsd&quot; namespace=&quot;default&quot;<br>
[&nbsp;&nbsp; 55.807010] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)<br>[&nbsp;&nbsp; 55.807018] apm: disabled - APM is not SMP safe.<br>[&nbsp;&nbsp; 62.649320] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28<br>
[&nbsp;&nbsp; 63.186031] NET: Registered protocol family 10<br>[&nbsp;&nbsp; 63.186534] lo: Disabled Privacy Extensions<br>[&nbsp;&nbsp; 65.183438] input: b43-phy0 as /devices/virtual/input/input6<br>[&nbsp;&nbsp; 65.736643] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)<br>
[&nbsp;&nbsp; 66.994234] b43-phy0 debug: Chip initialized<br>[&nbsp;&nbsp; 66.994422] b43-phy0 debug: 30-bit DMA initialized<br>[&nbsp;&nbsp; 66.994759] Registered led device: b43-phy0:tx<br>[&nbsp;&nbsp; 66.994789] Registered led device: b43-phy0:rx<br>[&nbsp;&nbsp; 66.994821] Registered led device: b43-phy0:radio<br>
[&nbsp;&nbsp; 66.994856] b43-phy0 debug: Wireless interface started<br>[&nbsp;&nbsp; 67.049815] b43-phy0 debug: Adding Interface type 2<br>[&nbsp;&nbsp; 67.055084] ADDRCONF(NETDEV_UP): eth1: link is not ready<br>[&nbsp;&nbsp; 69.127752] ADDRCONF(NETDEV_UP): eth0: link is not ready<br>
[&nbsp;&nbsp; 70.706608] tg3: eth0: Link is up at 100 Mbps, full duplex.<br>[&nbsp;&nbsp; 70.706614] tg3: eth0: Flow control is on for TX and on for RX.<br>[&nbsp;&nbsp; 70.709199] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready<br>[&nbsp;&nbsp; 71.907117] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28<br>
[&nbsp;&nbsp; 73.902237] NET: Registered protocol family 17<br>[&nbsp; 112.685673] UDF-fs: Partition marked readonly; forcing readonly mount<br>[&nbsp; 112.780180] UDF-fs INFO UDF <a href="http://0.9.8.1">0.9.8.1</a> (2004/29/09) Mounting volume &#39;KYOUHU_DVD&#39;, timestamp 2008/07/10 13:05 (121c)<br>
[ 2900.381490] ivtv:&nbsp; Start initialization, version 1.1.0<br>[ 2900.381538] ivtv:&nbsp; End initialization<br>[ 2968.144419] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28<br>
[ 3576.491797] nautilus[10592]: segfault at 64000018 eip b77122d6 esp bfe1cf50 error 4<br><br>Any help would be greatly appreciated. Thanks a lot for reading!<br><br>Matt<br></div>