<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">Sorry to change the thread but - I just joined the list.<br><br>Running Mythdora 5<br><br>cx18: Start initialization, version 1.0.0<br>cx18-0: Initializing card #0<br>cx18-0: Autodetected Hauppauge card<br>ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 19<br>cx18-0: cx23418 revision 01010000 (B)<br>tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 3101709<br>tveeprom 1-0050: MAC address is 00-0D-FE-2F-54-0D<br>tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)<br>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)<br>tveeprom 1-0050: audio processor is CX23418 (idx 38)<br>tveeprom 1-0050: decoder processor is CX23418 (idx 31)<br>tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter<br>cx18-0: Autodetected Hauppauge HVR-1600<br>cx18-0: VBI is not yet supported<br>tuner 2-0061: chip found @ 0xc2
(cx18 i2c driver #0-1)<br>cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)<br>tuner-simple 2-0061: creating new instance<br>tuner-simple 2-0061: type set to 50 (TCL 2002N)<br>cx18-0: Disabled encoder IDX device<br>cx18-0: Registered device video0 for encoder MPEG (2 MB)<br>DVB: registering new adapter (cx18)<br>MXL5005S: Attached at address 0x63<br>DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...<br>cx18-0: DVB Frontend registered<br>cx18-0: Registered device video32 for encoder YUV (2 MB)<br>cx18-0: Registered device video24 for encoder PCM audio (1 MB)<br>cx18-0: Initialized card #0: Hauppauge HVR-1600<br>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20<br>PCI: Setting latency timer of device 0000:00:1f.5 to 64<br>cx18: End initialization<br><br><br></td></tr></table><br>