Aug 24 16:45:57 pp kernel: [10876.355628] ACPI: PCI interrupt for device 0000:01:07.0 disabled Aug 24 16:45:57 pp kernel: [10876.355638] ivtv0: Removed Hauppauge WinTV PVR-150, card #0 Aug 24 16:47:08 pp kernel: [10909.620231] br0: port 1(eth0) entering disabled state Aug 24 16:47:08 pp kernel: [10909.636786] device eth0 left promiscuous mode Aug 24 16:47:08 pp kernel: [10909.636799] audit(1219589228.305:7): dev=eth0 prom=0 old_prom=256 auid=4294967295 Aug 24 16:47:08 pp kernel: [10909.636803] br0: port 1(eth0) entering disabled state Aug 24 16:47:08 pp kernel: [10909.657727] ACPI: PCI interrupt for device 0000:00:08.0 disabled Aug 24 16:47:47 pp kernel: [10910.909689] Syncing filesystems ... done. Aug 24 16:47:47 pp kernel: [10910.909719] PM: Preparing system for mem sleep Aug 24 16:47:47 pp kernel: [10910.909723] Freezing user space processes ... (elapsed 0.00 seconds) done. Aug 24 16:47:47 pp kernel: [10910.910729] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done. Aug 24 16:47:47 pp kernel: [10911.008960] PM: Entering mem sleep Aug 24 16:47:47 pp kernel: [10911.008962] Suspending console(s) Aug 24 16:47:47 pp kernel: [10911.023699] sd 3:0:0:0: [sdb] Stopping disk Aug 24 16:47:47 pp kernel: [10911.023809] sd 2:0:0:0: [sda] Synchronizing SCSI cache Aug 24 16:47:47 pp kernel: [10911.049598] sd 2:0:0:0: [sda] Stopping disk Aug 24 16:47:47 pp kernel: [10911.715437] ACPI handle has no context! Aug 24 16:47:47 pp kernel: [10911.715802] serial 00:09: disabled Aug 24 16:47:47 pp kernel: [10911.715817] ACPI handle has no context! Aug 24 16:47:47 pp kernel: [10911.715853] NVRM: RmPowerManagement: 4 Aug 24 16:47:47 pp kernel: [10911.939056] ACPI: PCI interrupt for device 0000:00:06.1 disabled Aug 24 16:47:47 pp kernel: [10911.955096] ACPI: PCI interrupt for device 0000:00:05.2 disabled Aug 24 16:47:47 pp kernel: [10911.987019] ACPI: PCI interrupt for device 0000:00:05.1 disabled Aug 24 16:47:47 pp kernel: [10912.003019] ACPI: PCI interrupt for device 0000:00:05.0 disabled Aug 24 16:47:47 pp kernel: [10912.034967] ACPI: PCI interrupt for device 0000:00:02.1 disabled Aug 24 16:47:47 pp kernel: [10912.050962] ACPI: PCI interrupt for device 0000:00:02.0 disabled Aug 24 16:47:47 pp kernel: [10912.173075] Disabling non-boot CPUs ... Aug 24 16:47:47 pp kernel: [10912.173104] CPU0 attaching NULL sched-domain. Aug 24 16:47:47 pp kernel: [10912.173105] CPU1 attaching NULL sched-domain. Aug 24 16:47:47 pp kernel: [10912.288032] CPU 1 is now offline Aug 24 16:47:47 pp kernel: [10912.288037] SMP alternatives: switching to UP code Aug 24 16:47:47 pp kernel: [10912.290057] CPU0 attaching sched-domain: Aug 24 16:47:47 pp kernel: [10912.290062] domain 0: span 01 Aug 24 16:47:47 pp kernel: [10912.290063] groups: 01 Aug 24 16:47:47 pp kernel: [10912.290393] CPU1 is down Aug 24 16:47:47 pp kernel: [10912.290573] Extended CMOS year: 2000 Aug 24 16:47:47 pp kernel: [ 0.338835] Back to C! Aug 24 16:47:47 pp kernel: [ 0.339165] Extended CMOS year: 2000 Aug 24 16:47:47 pp kernel: [ 0.342282] Enabling non-boot CPUs ... Aug 24 16:47:47 pp kernel: [ 0.342352] CPU0 attaching NULL sched-domain. Aug 24 16:47:47 pp kernel: [ 0.352667] SMP alternatives: switching to SMP code Aug 24 16:47:47 pp kernel: [ 0.353374] Booting processor 1/2 APIC 0x1 Aug 24 16:47:47 pp kernel: [ 0.363435] Initializing CPU#1 Aug 24 16:47:47 pp kernel: [ 0.440538] Calibrating delay using timer specific routine.. 4420.17 BogoMIPS (lpj=8840353) Aug 24 16:47:47 pp kernel: [ 0.440543] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Aug 24 16:47:47 pp kernel: [ 0.440545] CPU: L2 Cache: 512K (64 bytes/line) Aug 24 16:47:47 pp kernel: [ 0.440547] CPU 1/1 -> Node 0 Aug 24 16:47:47 pp kernel: [ 0.440549] CPU: Physical Processor ID: 0 Aug 24 16:47:47 pp kernel: [ 0.440550] CPU: Processor Core ID: 1 Aug 24 16:47:47 pp kernel: [ 0.440620] AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Aug 24 16:47:47 pp kernel: [ 0.440761] CPU0 attaching sched-domain: Aug 24 16:47:47 pp kernel: [ 0.440763] domain 0: span 03 Aug 24 16:47:47 pp kernel: [ 0.440765] groups: 01 02 Aug 24 16:47:47 pp kernel: [ 0.440767] domain 1: span 03 Aug 24 16:47:47 pp kernel: [ 0.440768] groups: 03 Aug 24 16:47:47 pp kernel: [ 0.440770] CPU1 attaching sched-domain: Aug 24 16:47:47 pp kernel: [ 0.440771] domain 0: span 03 Aug 24 16:47:47 pp kernel: [ 0.440772] groups: 02 01 Aug 24 16:47:47 pp kernel: [ 0.440774] domain 1: span 03 Aug 24 16:47:47 pp kernel: [ 0.440775] groups: 03 Aug 24 16:47:47 pp kernel: [ 0.441088] CPU1 is up Aug 24 16:47:47 pp kernel: [ 0.441591] ACPI: Unable to turn cooling device [ffff8101b7776700] 'off' Aug 24 16:47:47 pp kernel: [ 0.441610] PM: Writing back config space on device 0000:00:00.0 at offset f (was 0, writing ff) Aug 24 16:47:47 pp kernel: [ 0.444646] Switched to high resolution mode on CPU 1 Aug 24 16:47:47 pp kernel: [ 0.456539] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 Aug 24 16:47:47 pp kernel: [ 0.456544] PCI: Setting latency timer of device 0000:00:02.0 to 64 Aug 24 16:47:47 pp kernel: [ 0.496505] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 Aug 24 16:47:47 pp kernel: [ 0.496508] PCI: Setting latency timer of device 0000:00:02.1 to 64 Aug 24 16:47:47 pp kernel: [ 0.512503] PCI: Setting latency timer of device 0000:00:04.0 to 64 Aug 24 16:47:47 pp kernel: [ 0.513645] ata2: port disabled. ignoring. Aug 24 16:47:47 pp kernel: [ 0.528489] PM: Writing back config space on device 0000:00:05.0 at offset 1 (was b00000, writing b00007) Aug 24 16:47:47 pp kernel: [ 0.528497] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 Aug 24 16:47:47 pp kernel: [ 0.528500] PCI: Setting latency timer of device 0000:00:05.0 to 64 Aug 24 16:47:47 pp kernel: [ 0.544478] PM: Writing back config space on device 0000:00:05.1 at offset 1 (was b00000, writing b00007) Aug 24 16:47:47 pp kernel: [ 0.544485] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21 Aug 24 16:47:47 pp kernel: [ 0.544489] PCI: Setting latency timer of device 0000:00:05.1 to 64 Aug 24 16:47:47 pp kernel: [ 0.560465] PM: Writing back config space on device 0000:00:05.2 at offset 1 (was b00000, writing b00007) Aug 24 16:47:47 pp kernel: [ 0.560473] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 20 (level, low) -> IRQ 20 Aug 24 16:47:47 pp kernel: [ 0.560476] PCI: Setting latency timer of device 0000:00:05.2 to 64 Aug 24 16:47:47 pp kernel: [ 0.560493] PCI: Setting latency timer of device 0000:00:06.0 to 64 Aug 24 16:47:47 pp kernel: [ 0.576455] PM: Writing back config space on device 0000:00:06.1 at offset 1 (was b00006, writing b00002) Aug 24 16:47:47 pp kernel: [ 0.576463] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21 Aug 24 16:47:47 pp kernel: [ 0.576467] PCI: Setting latency timer of device 0000:00:06.1 to 64 Aug 24 16:47:47 pp kernel: [ 0.872234] ata8: SATA link down (SStatus 0 SControl 300) Aug 24 16:47:47 pp kernel: [ 0.882515] ata7: SATA link down (SStatus 0 SControl 300) Aug 24 16:47:47 pp kernel: [ 0.996159] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Aug 24 16:47:47 pp kernel: [ 1.004238] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out Aug 24 16:47:47 pp kernel: [ 1.012142] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Aug 24 16:47:47 pp kernel: [ 1.012309] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 100000, writing 100404) Aug 24 16:47:47 pp kernel: [ 1.012321] PCI: Setting latency timer of device 0000:00:0a.0 to 64 Aug 24 16:47:47 pp kernel: [ 1.012332] PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 100000, writing 100404) Aug 24 16:47:47 pp kernel: [ 1.012342] PCI: Setting latency timer of device 0000:00:0b.0 to 64 Aug 24 16:47:47 pp kernel: [ 1.012346] ata4.00: configured for MWDMA2 Aug 24 16:47:47 pp kernel: [ 1.012352] PM: Writing back config space on device 0000:00:0c.0 at offset 1 (was 100000, writing 100404) Aug 24 16:47:47 pp kernel: [ 1.012362] PCI: Setting latency timer of device 0000:00:0c.0 to 64 Aug 24 16:47:47 pp kernel: [ 1.012371] PM: Writing back config space on device 0000:00:0d.0 at offset 1 (was 100000, writing 100404) Aug 24 16:47:47 pp kernel: [ 1.012381] sd 3:0:0:0: [sdb] 8027712 512-byte hardware sectors (4110 MB) Aug 24 16:47:47 pp kernel: [ 1.012385] PCI: Setting latency timer of device 0000:00:0d.0 to 64 Aug 24 16:47:47 pp kernel: [ 1.012392] sd 3:0:0:0: [sdb] Write Protect is off Aug 24 16:47:47 pp kernel: [ 1.012394] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Aug 24 16:47:47 pp kernel: [ 1.012397] PM: Writing back config space on device 0000:00:0e.0 at offset 1 (was 100000, writing 100404) Aug 24 16:47:47 pp kernel: [ 1.012408] PCI: Setting latency timer of device 0000:00:0e.0 to 64 Aug 24 16:47:47 pp kernel: [ 1.012411] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Aug 24 16:47:47 pp kernel: [ 1.012416] PM: Writing back config space on device 0000:00:0f.0 at offset 7 (was 1f1, writing 200001f1) Aug 24 16:47:47 pp kernel: [ 1.012421] PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was 100007, writing 100407) Aug 24 16:47:47 pp kernel: [ 1.012430] PCI: Setting latency timer of device 0000:00:0f.0 to 64 Aug 24 16:47:47 pp kernel: [ 1.012462] PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 2008, writing 4008) Aug 24 16:47:47 pp kernel: [ 1.012466] PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2100006, writing 2100002) Aug 24 16:47:47 pp kernel: [ 1.012516] NVRM: RmPowerManagement: 5 Aug 24 16:47:47 pp kernel: [ 1.192350] ata6.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out Aug 24 16:47:47 pp kernel: [ 1.235977] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Aug 24 16:47:47 pp kernel: [ 1.380043] ata6.00: configured for UDMA/33 Aug 24 16:47:47 pp kernel: [ 1.389663] serial 00:09: activated Aug 24 16:47:47 pp kernel: [ 1.389677] i8042 kbd 00:0a: activation failed Aug 24 16:47:47 pp kernel: [ 1.399960] ata5.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out Aug 24 16:47:47 pp kernel: [ 1.571834] ata5.00: configured for UDMA/100 Aug 24 16:47:47 pp kernel: [ 1.608727] sd 2:0:0:0: [sda] Starting disk Aug 24 16:47:47 pp kernel: [ 5.472907] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Aug 24 16:47:47 pp kernel: [ 5.480992] ata3.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out Aug 24 16:47:47 pp kernel: [ 5.480994] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out Aug 24 16:47:47 pp kernel: [ 5.591808] ata3.00: configured for UDMA/133 Aug 24 16:47:47 pp kernel: [ 5.631393] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) Aug 24 16:47:47 pp kernel: [ 5.631404] sd 2:0:0:0: [sda] Write Protect is off Aug 24 16:47:47 pp kernel: [ 5.631406] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Aug 24 16:47:47 pp kernel: [ 5.631419] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 24 16:47:47 pp kernel: [ 5.631426] sd 3:0:0:0: [sdb] Starting disk Aug 24 16:47:47 pp kernel: [ 5.681124] PM: Finishing wakeup. Aug 24 16:47:47 pp kernel: [ 5.681126] Restarting tasks ... done. Aug 24 16:47:47 pp kernel: [ 6.311287] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. Aug 24 16:47:47 pp kernel: [ 6.311424] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 Aug 24 16:47:47 pp kernel: [ 6.311431] PCI: Setting latency timer of device 0000:00:08.0 to 64 Aug 24 16:47:47 pp kernel: [ 6.828660] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:d1:1a:e5 Aug 24 16:47:47 pp kernel: [ 6.828665] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 Aug 24 16:47:47 pp kernel: [ 6.890435] br0: port 2(tap0) entering disabled state Aug 24 16:47:47 pp kernel: [ 7.025809] device tap0 left promiscuous mode Aug 24 16:47:47 pp kernel: [ 7.025822] audit(1219589267.744:8): dev=tap0 prom=0 old_prom=256 auid=4294967295 Aug 24 16:47:47 pp kernel: [ 7.025827] br0: port 2(tap0) entering disabled state Aug 24 16:47:47 pp kernel: [ 7.132008] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Aug 24 16:47:47 pp kernel: [ 7.134907] device eth0 entered promiscuous mode Aug 24 16:47:47 pp kernel: [ 7.134916] audit(1219589267.852:9): dev=eth0 prom=256 old_prom=0 auid=4294967295 Aug 24 16:47:47 pp kernel: [ 7.136424] eth0: no link during initialization. Aug 24 16:47:47 pp kernel: [ 7.143538] ADDRCONF(NETDEV_UP): eth0: link is not ready Aug 24 16:47:47 pp kernel: [ 7.145643] device tap0 entered promiscuous mode Aug 24 16:47:47 pp kernel: [ 7.145657] audit(1219589267.864:10): dev=tap0 prom=256 old_prom=0 auid=4294967295 Aug 24 16:47:47 pp kernel: [ 7.149373] br0: port 2(tap0) entering learning state Aug 24 16:47:49 pp kernel: [ 8.430399] eth0: link up. Aug 24 16:47:49 pp kernel: [ 8.437035] br0: port 1(eth0) entering learning state Aug 24 16:47:49 pp kernel: [ 8.437048] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Aug 24 16:47:52 pp kernel: [ 10.211701] br0: topology change detected, propagating Aug 24 16:47:52 pp kernel: [ 10.211706] br0: port 2(tap0) entering forwarding state Aug 24 16:47:54 pp kernel: [ 10.847579] br0: topology change detected, propagating Aug 24 16:47:54 pp kernel: [ 10.847586] br0: port 1(eth0) entering forwarding state Aug 24 16:47:55 pp kernel: [ 13.292709] br0: no IPv6 routers present Aug 24 16:47:55 pp kernel: [ 13.445332] tap0: no IPv6 routers present Aug 24 16:47:56 pp kernel: [ 13.792323] eth0: no IPv6 routers present Aug 24 16:48:13 pp kernel: [ 21.632147] ivtv: Start initialization, version 1.1.0 Aug 24 16:48:13 pp kernel: [ 21.632218] ivtv0: Initializing card #0 Aug 24 16:48:13 pp kernel: [ 21.632222] ivtv0: Autodetected Hauppauge card (cx23416 based) Aug 24 16:48:13 pp kernel: [ 21.632258] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 Aug 24 16:48:13 pp kernel: [ 21.635847] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Aug 24 16:48:14 pp kernel: [ 21.643254] cx25840 2-0044: cx25842-24 found @ 0x88 (ivtv i2c driver #0) Aug 24 16:48:14 pp kernel: [ 21.643374] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) Aug 24 16:48:14 pp kernel: [ 21.675672] tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10232753 Aug 24 16:48:14 pp kernel: [ 21.675676] tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55) Aug 24 16:48:14 pp kernel: [ 21.675680] tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44) Aug 24 16:48:14 pp kernel: [ 21.675683] tveeprom 2-0050: audio processor is CX25842 (idx 36) Aug 24 16:48:14 pp kernel: [ 21.675685] tveeprom 2-0050: decoder processor is CX25842 (idx 29) Aug 24 16:48:14 pp kernel: [ 21.675687] tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter Aug 24 16:48:14 pp kernel: [ 21.675691] ivtv0: Autodetected Hauppauge WinTV PVR-150 Aug 24 16:48:14 pp kernel: [ 21.675694] ivtv0: Reopen i2c bus for IR-blaster support Aug 24 16:48:14 pp kernel: [ 21.701303] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Aug 24 16:48:14 pp kernel: [ 21.761007] cx25840 2-0044: cx25842-24 found @ 0x88 (ivtv i2c driver #0) Aug 24 16:48:14 pp kernel: [ 21.761112] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) Aug 24 16:48:14 pp kernel: [ 21.781046] tuner-simple 2-0061: type set to 55 (TCL 2002MB) Aug 24 16:48:14 pp kernel: [ 21.781051] tuner 2-0061: type set to TCL 2002MB Aug 24 16:48:14 pp kernel: [ 21.781610] ivtv0: Registered device video0 for encoder MPG (4096 kB) Aug 24 16:48:14 pp kernel: [ 21.781627] ivtv0: Registered device video32 for encoder YUV (2048 kB) Aug 24 16:48:14 pp kernel: [ 21.781641] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) Aug 24 16:48:14 pp kernel: [ 21.781654] ivtv0: Registered device video24 for encoder PCM (320 kB) Aug 24 16:48:14 pp kernel: [ 21.781656] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 Aug 24 16:48:14 pp kernel: [ 21.781671] ivtv: End initialization Aug 24 16:48:14 pp kernel: [ 22.082846] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Aug 24 16:48:15 pp kernel: [ 22.173591] ivtv0: Encoder revision: 0x02060039 Aug 24 16:48:18 pp kernel: [ 24.595787] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)