[ivtv-devel] [UNKNOWN IVTV CARD]Avermedia C755

jaakko tuomainen jaakko.tuomainen at gmail.com
Thu Aug 14 21:41:23 CEST 2008


Hi,

I have Avermedia C755 video capture card installed
in my Fujitsu Siemens Activy Media Center 570
It has two analog video inputs (the first is in front
panel and the other is the scart connector)
(front has s-video, rca-plugs for video and stereo audio)
You can see used chips in dmesg info.
I haven't tested yet if the video input works already.

Jaakko Tuomainen

lspci
01:03.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
    Subsystem: Avermedia Technologies Inc Device c5ff
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ivtv
    Kernel modules: ivtv

dmesg | grep ivtv
ivtv:  Start initialization, version 1.2.0
ivtv0: Initializing card #0
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0:               subsystem vendor/device: 1461/c5ff
ivtv0:               cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and
what kind of
ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: Invalid EEPROM
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv:  End initialization
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ivtvdriver.org/pipermail/ivtv-devel/attachments/20080814/fc00f402/attachment.html 


More information about the ivtv-devel mailing list